METAR TAF 3D
Decoder
Live map

METAR & TAF Decoder

Paste any raw METAR, SPECI or TAF — or type an airport's ICAO code — and every group is decoded into plain English. Tap a code to see its official definition.

or

How a METAR is put together

A METAR is a fixed sequence of groups, always in the same order; groups that do not apply are simply left out. Once you know the order you can read any airport in the world:

GroupExampleMeaning
StationLTBSFour-letter ICAO code of the aerodrome (not the three-letter IATA code).
Time141350ZDay 14, 13:50 UTC. METAR times are always UTC.
Wind24012G22KT 200V270From 240° true at 12 kt, gusting 22 kt, direction varying 200°–270°.
Visibility9999 / 10SM10 km or more; US stations report statute miles.
Weather-SHRALight rain showers. + heavy, VC in the vicinity, TS thunderstorm.
CloudFEW030 SCT100CBFew at 3,000 ft, scattered cumulonimbus at 10,000 ft above the aerodrome.
Temperature18/12Temperature 18 °C, dew point 12 °C; M marks minus.
PressureQ1012 / A2988QNH 1012 hPa, or 29.88 inHg in the US.
TrendTEMPO 4000 TSRATemporarily 4,000 m in thunderstorm with rain during the next two hours.

The full walk-through, with the traps that catch pilots on checkrides, is in How to read METAR reports.

Reading a TAF

A TAF (Terminal Aerodrome Forecast) uses the same codes for wind, visibility, weather and cloud, but adds a validity period and change groups: FM (from a set time), BECMG (a gradual change), TEMPO (temporary fluctuations) and PROB30/PROB40 (probability). The decoder explains each group and its time window. For the full method, see How to read a TAF forecast; for what the resulting VFR, MVFR, IFR and LIFR labels mean, see VFR vs IFR flight categories.

Live decoded reports

Every airport page already shows the latest METAR and TAF decoded, with runway crosswind, a 96-hour meteogram and a climate summary: EGLL London Heathrow · KJFK New York JFK · LTFM Istanbul · EDDF Frankfurt · OMDB Dubai · LTBS Dalaman. Browse all of them in the airport directory.

Advertisement

Frequently asked questions

How do I decode a METAR?

Paste the raw report into the box above and press Decode. Every group is explained in plain English, in order: station, time, wind, visibility, weather, cloud, temperature and dew point, pressure, then trend and remarks. You can also type a four-letter ICAO code to load that airport's latest METAR and TAF.

Does the decoder work for TAF forecasts too?

Yes. TAF groups use the same codes as a METAR for wind, visibility, weather and cloud, plus change groups such as FM, BECMG, TEMPO and PROB30. Paste a TAF on its own or together with a METAR; each line is decoded separately.

Does it understand US reports and RMK remarks?

Yes. Statute-mile visibility (10SM, 1 1/2SM), inHg altimeter settings (A2992) and the RMK section — AO2, SLP, T-groups, pressure tendency, precipitation amounts — are decoded. National codes used in other countries are labelled with the country they apply to.

Where does the explanation of each code come from?

From the ICAO Annex 3 and WMO Manual on Codes definitions, and for country-specific codes from that country's national publication. Where a code has an official source, the explanation card links to it.

Is my report sent anywhere?

No. Decoding happens entirely in your browser. Only when you ask for an airport's live report does the page fetch that airport's latest METAR and TAF.